EuroScrew

Products Home Products EuroScrew ANVISA No.: 80686360193Images for illustrative purposes only EuroScrew EuroScrew is a bio-absorbable interference screw for cruciate ligament reconstruction. This screw has a design that is equally adapted to rotator cuff or gracilis and semitendinosus tendon grafts. ANVISA No.: 80686360193Images for illustrative purposes only Technical specifications Composed 100% of PLA, a polymer known to be degradable by hydrolysis;   Femoral screws have a hemispherical head, which reduces the risk of damage to the femoral glenoid;   Tibia screws have a flat head, which allows them to be screwed deep into the tibia canal. They are longer and wider (in diameter) than the femoral screws.   Single-use product.   Models Femoral Screw:• EuroScrew Ø 7 mm L 24 mm – T720724• EuroScrew Ø 8 mm L 24 mm – T720824• EuroScrew Ø 9 mm L 24 mm – T720924 Tibial Screw:• EuroScrew Ø 8 mm L 30 mm – T720830• EuroScrew Ø 9 mm L 30 mm – T720930• EuroScrew Ø 10 mm L 30 mm – T721030 MANUAL CATALOG VIDEO DOUBT Others Products edit post edit post edit post edit post

FastFit Anchor Razek

Products Home Products FastFit Anchor Razek ANVISA No.: 80356130205Images for illustrative purposes only FastFit Anchor Razek The FastFit Anchor Razek flexible suture anchor family is indicated for use in arthroscopic or conventional orthopedic surgical procedures on the upper and lower limbs, in which sutures are used to join soft tissues such as ligaments, tendons or joint capsules to the bone. Its design is based on the principles of minimal aggression and greater holding power. We have needlepoint and non-needlepoint models. Reduced bone removal – the smaller diameter drill makes the hole created for the implant much smaller. As a result, there is greater preservation of the bone-tissue contact surface, as well as less aggression, considerably reducing post-surgical pain;   Complications such as fractures, ostolysis and synovitis, which can occur with other materials, especially bioabsorbable materials, are minimized.   The reduced diameter of the anchor reduces the need for larger bone perforations, which are common with metal, peek and bioabsorbable anchors, minimizing complications such as bone fragility and relesions. In addition, in cases where more anchors are needed, there will be less chance of complications and a greater possibility of their proper positioning;   With the implant based entirely on sutures, the possibility of intra-articular free bodies that can occur in other types of implants is eliminated.   ANVISA No.: 80356130205Images for illustrative purposes only Technical specifications • Single-use product • Sterilization validity: 3 years • Available in three diameters: 1.6 mm, 2.0 mm and 2.5 mm – loaded with very high-strength wires (UHMWPE * ForceFiber® Teleflex*); Models FASTFIT ANCHOR RAZEK – 1.6 mm   Not adjustable1.6 (FFA 21-16S) – (Code 500120070)1.6 (FFA 21-16M) – (Code 500120075)1.6 (FFA 21-16L) – (Code 500120077)1.6 (FFA 12-16S) – (Code 500120080)1.6 (FFA 12-16M) – (Code 500120085)1.6 (FFA 12-16L) – (Code 500120087) With needles1.6 (FFA 12-16SA) – (Code 500120155)1.6 (FFA 21-16SA) – (Code 500120150)   FASTFIT ANCHOR RAZEK – 2.0 mm Not adjustable2.0 (FFA 22-20M) – (Code 500120060)2.0 (FFA 22-20L) – (Code 500120065) With needles2,0 (FFA 22-20MA) – (Code 500120145)   FASTFIT ANCHOR RAZEK – 2.5 mm Not adjustable2.5 (FFA 22-25M) – (Code 500120090)2.5 (FFA 22-25L) – (Code 500120095) With needles2,5 (FFA 22-25MA) – (Code 500120295)   MANUAL CATALOG VIDEO DOUBT Others Products edit post edit post edit post edit post

Cannulated Compression Screw MM Razek

Products Home Products ANVISA No.: 80356130139Images for illustrative purposes only These are screws for bone synthesis made of titanium alloy ASTM F136. They have non-rigid fastening characteristics and a hexalobular fitting. They are cannulated, non-resorbable and self-tapping. They are designed to offer the surgeon the possibility of fast and precise fixation and compression in fractures, fusions and deformity corrections. The MM Razek Cannulated Compression Screw is used in fractures with mini and micro fragments. ANVISA No.: 80356130139Images for illustrative purposes only Technical specifications With Head• Low profile ball head• Compatible with MM Compression Screw Washer• Together with the Washer, it allows for greater distribution of the contact force with the bone surface Double Thread• Headless design, in which the proximal end is tapered and threaded• Total accommodation of the screw, minimizing prominences and tissue irritation• Provides excellent interfragmentary compression during insertion Models Models With Head• Distal Thread Diameter: 2.2 mm• Head Diameter: 3.6 mm• Shank Diameter: 1.8 mm• Thread Length: 4.0 to 15 mm• Size: 10 mm to 40 mm• Washer Diameter: 5.6 mm• Guide Wire: 0.9 x 100 mm Double Thread Models• Distal Thread Diameter: 2.2 mm• Head Diameter: 3.0 mm• Shank Diameter: 1.8 mm• Thread Length: 4.0 to 15 mm• Size: 10 mm to 40 mm• Guide Wire: 0.9 x 100 mm MANUAL CATALOG VIDEO DOUBT Others Products edit post edit post edit post edit post

FastFit Anchor Razek – Adjustable

Products Home Products ANVISA No.: 80356130205Images for illustrative purposes only FastFit Anchor Razek – Adjustable The FastFit Anchor Razek flexible suture anchor family is indicated for use in arthroscopic or conventional orthopaedic surgical procedures on the upper and lower limbs, in which sutures are used to join soft tissues such as ligaments, tendons or joint capsules to the bone. Its design is based on the principles of minimal aggression and greater holding power.  Reduced bone removal – the smaller diameter drill makes the hole created for the implant much smaller. As a result, there is greater preservation of the bone-tissue contact surface, as well as less aggression, considerably reducing post-surgical pain;   Complications such as fractures, ostolysis and synovitis, which can occur with other materials, especially bioabsorbable materials, are minimized.   The reduced diameter of the anchor reduces the need for larger bone perforations, which are common with metal, peek and bioabsorbable anchors, minimizing complications such as bone fragility and relesions. In addition, in cases where more anchors are needed, there will be less chance of complications and a greater possibility of their proper positioning;   With the implant based entirely on sutures, the possibility of intra-articular free bodies that can occur in other types of implants is eliminated.   ANVISA No.: 80356130205Images for illustrative purposes only Technical specifications • Single-use product • Sterilization validity: 3 years • Available in three diameters: 1.6 mm, 2.0 mm and 2.5 mm – loaded with very high-strength wires (UHMWPE * ForceFiber® Teleflex*); Models FASTFIT ANCHOR RAZEK – 1.6 mm Adjustable1.6 Adjustable (FAA 11-16S) – (Code 500120050)1.6 Adjustable (FAA 11-16M) – (Code: 500120055)1.6 Adjustable (FAA 11-16L) – (Code 500120057)   FASTFIT ANCHOR RAZEK – 2.0 mm Adjustable2.0 Adjustable (FAA 12-20M) – (Code 500120040)2.0 Adjustable (FAA 12-20L) – (Code 500120045)   FASTFIT ANCHOR RAZEK – 2.5 mm Adjustable2.5 Adjustable (FAA 12 25M) – (Code 500120100)2.5 Adjustable (FAA 12 25L) – (Code 500120105) MANUAL CATALOG VIDEO DOUBT Others Products edit post edit post edit post edit post

FastFit Anchor Razek (Model with tape)

Products Home Products ANVISA No.: 80356130205Images for illustrative purposes only FastFit Anchor Razek (Modelo com fita) The FastFit Anchor Razek flexible suture anchor family is indicated for use in arthroscopic or conventional orthopaedic surgical procedures on the upper and lower limbs, in which sutures are used to join soft tissues such as ligaments, tendons or joint capsules to the bone. Its design is based on the principles of minimal aggression and greater holding power. ANVISA No.: 80356130205Images for illustrative purposes only More Details Tape models offer a larger contact surface, providing superior clinical results*. The tapes are extremely resistant, made from ultra-high molecular weight polyethylene. *Maia Dias, C., Gonçalves, S.B., Completo, A. et al. Why are tapes better than wires in knotless rotator cuff repairs? An evaluation of force, pressure and contact area in a tendon bone unit mechanical model. J EXP ORTOP 8, 9 (2021). https://doi.org/10.1186/s40634-020-00321-y Technical specifications Single-use product Sterilization validity: 3 years Ø 1.6mm1.6 (FTB 12-16M) – (Code 500120260)1.6 (FTA 12-16M) – (Code 500120265)1.6 (FTB 12-16L) – (Code 500120280)1.6 (FTA 12-16L) – (Code 500120285) Ø 2.5mm2.5 (FTP 22-25M) – (Code 500120270)2.5 (FTP 22-25L) – (Code 500120290) Model with needle2.5 (FTP 22-25MA) – (Code 500120275) Inserting device shank lengthM: 145 mm / L: 255 mmTape Width: 1.5 mm MANUAL CATALOG VIDEO DOUBT Others Products edit post edit post edit post edit post

FastFit Anchor Razek (models 1.5 and 1.5 Mini)

Products Home Products ANVISA No.: 80356130205Images for illustrative purposes only Indications for use: Temporomandibular Joint (TMJ), Foot and Ankle, Hand and Wrist FastFit Anchor Razek is a flexible suture anchor that guarantees maximum fixation with minimal bone aggression. The design is minimally invasive and uses highly resistant materials. This guarantees high stability and fewer complications in the post-operative period. The product’s instruments are purchased separately. ANVISA No.: 80356130205Images for illustrative purposes only Technical specifications • Single-use product • Sterilization validity: 3 years • Safe for use in an MRI environment Models • 1.5 Mini (FFM 10-15S) – (Code 500120115)• 1.5 (FFA 11-15S) – (Code 500120125) Adjustable models• 1.5 Mini Adjustable (FAM 10-15S) – (Code 500120110)• 1.5 Adjustable (FAA 10-15S) – (Code – 500120120) Models with needles• 1.5 Mini (FFM 10-15SA) – (Code 500120210)• 1.5 (FFA 11-15SA) – (Code 500120215) MANUAL CATALOG VIDEO DOUBT Others Products edit post edit post edit post edit post Kit Complementar para Cirurgia Endoscópica Interlaminar de Coluna Razek Kit de Instrumental para Parafuso de Compressão Canulado Razek Kit Complementar para Cirurgia Endoscópica de Coluna Razek L Kit para Correção de Desvios Ortopédicos Foot RZ System

FastFit Knotless Razek

Products Home Products FastFit Knotless Razek ANVISA No.: 80356130211Images for illustrative purposes only FastFit Knotless Razek The FastFit Knotless Razek family composed of anchor-type implants indicated for the fixation of soft tissue to bone, acting to support tensile loads through compression between the anchor and bone tissue when implanted. It is indicated for use in arthroscopic or conventional orthopaedic surgical procedures on the upper and lower limbs, in which the anchor, using sutures, is used to join soft tissues such as ligaments, tendons or joint capsules to the bone. The implants in this family are composed of an anchor – comprising the Anchor Body and Anchor Eye – made from Polyetheretherketone. (PEEK). The FastFit Knotless Razek family anchors are suspension fixation elements whose combination of anchor and suture allows soft tissue to be reinserted into the bone, enabling stabilization, repair and reconstruction, acting as a fixation pole or distributing tensile loads. To do this, the anchor is impacted into the bone tissue together with the sutures. The sutures attached to the anchor, in turn, are sutured to the soft tissue so that it can be fixed and regenerated.  ANVISA No.: 80356130211Images for illustrative purposes only Technical specifications • Single-use product • Sterilization validity: 3 years Models D2.9 – Sizes Ø 3.2 x 15.99 mm (Code 500120300) D3.5 – Sizes Ø 3.5 x 20.3 mm (Code 500120305) D4.5 – Sizes Ø 4.6 x 23.8 mm (Code 500120310) MANUAL CATALOG VIDEO DOUBT Others Products edit post edit post edit post edit post

FastFit Razek

Products Home Products FastFit Razek ANVISA No.: 80356130207Images for illustrative purposes only FastFit Razek The FastFit Razek family implants are composed of a flexible suture anchor and a cortical plate, interconnected by an adjustable suture, and are indicated for reapproximation and stabilization between bone structures in different arthroscopic or conventional orthopedic surgical procedures. The unique combination of the flexible suture anchor and the cortical plate results in a suspension fixation element that acts as a stabilization pole or distributes tensile loads. The adjustable suture, on the other hand, has an adjustable knot that makes it possible to quickly adjust the tension of the set and the distance between the bone structures. Compared to traditional button-button fastening systems, the FastFit Razek has the advantage of preserving the 4th cortical bone, resulting in a fixation with less removal of biological material and fewer prominences. ANVISA No.: 80356130207Images for illustrative purposes only Technical specifications Single-use product Sterilization validity: 3 years Anchor characteristics Available in 2.5 mm diameter – loaded with very high-strength wire (UHMWPE ** ForceFiber® Teleflex **); Reduced bone removal – the smaller diameter drill makes the hole created for the implant much smaller. As a result, there is greater preservation of the bone-tissue contact surface, as well as less aggression, considerably reducing post-surgical pain; Complications such as fractures, ostolysis and synovitis, which can occur with other materials, especially bioabsorbable ones, are minimized; The reduced diameter of the anchor reduces the need for larger bone perforations, which are common with metal, peek and bioabsorbable anchors, minimizing complications such as bone fragility and relesions. In addition, in cases where more anchors are needed, there will be less chance of complications and a greater possibility of their proper positioning. Characteristics of Cortical Plates Cortical plates available in 3 models for different applications; The STD cortical plate has a geometry that allows it to be passed through the bone tunnel with the aid of a passing suture. Characteristic EasyFlip design that eliminates the need for extra suturing to tilt the device; The ACB cortical plate has a geometry that allows it to be perfectly accommodated in the most different bone structures, with a large surface area and excellent distribution of stresses on the cortical surface; The ACP cortical plate has a geometry that allows it to be accommodated in the holes of the Contact Plates, as part of the FastFit Razek family, and in the compression holes of the plates of the UpperTreat RZ Rigid Fixation System, offering the surgeon the option of a combined repair; Cortical Plates and Contact Plates made of titanium alloy ASTM F136. Models FastFit Razek – 2.5 Adjustable STD (FST 15-25M)(Code 500120015) FastFit Razek – 2.5 Adjustable ACP (FAP 15-25M)(Code 500120020) FastFit Razek – 2.5 Adjustable ACP (FPC 15-32M)(Code 500120021) FastFit Razek – 2.5 Adjustable ACP (FPC 15-36M)(Code 500120022) FastFit Razek – 2.5 Adjustable ACP (FPC 15-40M)(Code 500120023)  FastFit Razek – 2.5 Adjustable ACP (FPC 15-25M)(Code 500120030) MANUAL CATALOG VIDEO DOUBT Others Products edit post edit post edit post edit post

Feet RZ Rigid Fixation Plate System

Products Home Products ANVISA No.: 80356130162Images for illustrative purposes only The Feet RZ Rigid Fixation Plate System was developed for trauma, osteotomy and arthrodesis procedures in the various regions of the foot. The plates have an anatomical geometry and a low profile, which eliminates the need for shaping, facilitates the surgical procedure, minimizes prominences and gives the patient greater comfort. In addition, they come in different sizes and orientations in order to adapt to the different anatomies of patients. Its locking and compression holes are strategically positioned, providing maximum fixation stability, even in complex cases. ANVISA No.: 80356130162Images for illustrative purposes only Technical specifications Locking and non-locking screws Made of titanium alloy Non-cannulated Self-tapping threads No hexalobular socket Plates Made of titanium alloy ASTM F136 / NBR ISO 5832-3 and anodized Anatomical contour and low profile, reducing prominences and minimizing soft tissue irritation Compatible with all models of locking and non-locking screws They have three orientations (right, left and single), identified by color-coding: Right: gold anodized Left: anodized in pink color Unique: green anodized Osteotomy plates are anodized in water green. Models Locking screws• Designed to be used in blocked holes.They have specially designed threads for attachment to the cortical portion of the bone.   Features:• Distal Thread (Diameter): 3.5 mm• Proximal Thread (Diameter): 5.1 mm• Length: 8 to 50 mm   Non-locking screws• Designed to be used in compression or blocked holes. They have specially designed threads for attachment to the cancellous portion of the bone.   Features:• Distal Thread (Diameter): 2.7 mm• Head Diameter: 4.8 mm• Length: 8 to 30 mm   Distal Thread (Diameter): 3.5 mm• Head Diameter: 4.8 mm• Length: 8 to 50 mm   Distal Thread (Diameter): 4.0 mm• Head Diameter: 4.8 mm• Length: 8 to 60 mm   Cotton and Evans Osteotomy Plate – OTC• Used in procedures to correct flat feet, through wedge osteotomies on the calcaneus (Evans) and medial cuneiform bone (Cotton).   Features:• Color: aqua green• Thickness: 1.5 mm• Variations in wedge spacing: 2, 4, 5, 6, 7, 8, 10, and 12 (mm)   Models:• Cotton and Evans Osteotomy 2 Holes 23 x 2 mm – OTC 00-A-02-U• Cotton and Evans Osteotomy 2 Holes 25 x 4 mm – OTC 00-A-04-U• Cotton and Evans Osteotomy 2 Holes 26 x 5 mm – OTC 00-A-05-U• Cotton and Evans Osteotomy 2 Holes 27 x 6 mm – OTC 00-A-06-U• Cotton and Evans Osteotomy 2 Holes 28 x 7 mm – OTC 00-A-07-U• Cotton and Evans Osteotomy 2 Holes 29 x 8 mm – OTC 00-A-08-U• Cotton and Evans Osteotomy 2 Holes 31 x 10 mm – OTC 00-A-10-U• Cotton and Evans Osteotomy 2 Holes 33 x 12 mm – OTC 00-A-12-U   Bunion Osteotomy Plate – OTB• Used in Hallux Valgus correction procedures, through a wedge osteotomy at the base of the first metatarsal.   Features:• Color: aqua green• Thickness: 1.5 mm• Variations in wedge spacing: 2, 3, 4, 5, and 6 (mm)   Models:• Bunion Osteotomy 4 Holes 32 x 2 mm – OTB 00-A-02-U• Bunion Osteotomy 4 Holes 33 x 3 mm – OTB 00-A-03-U• Bunion Osteotomy 4 Holes 34 x 4 mm – OTB 00-A-04-U• Bunion Osteotomy 4 Holes 35 x 5 mm – OTB 00-A-05-U• Bunion Osteotomy 4 Holes 36 x 6 mm – OTB 00-A-06-U   Heel Osteotomy Plate – OIC• Used in procedures to correct rearfoot valgus, through a sliding osteotomy in the calcaneus.   Features:• Color: aqua green• Thickness: 1.8 mm• Variations in osteotomy height: 6 x 8 x 10 (mm)   Models:• Heel Osteotomy 5 Holes 24 x 6 mm – OIC 00-A-06-U• Heel Osteotomy 5 Holes 24 x 8 mm – OIC 00-A-08-U• Heel Osteotomy 5 Holes 24 x 10 mm – OIC 00-A-10-U   Tarsometatarsal Fusion Plate – TMT• Used in procedures to treat Lisfranc fractures by fusing the tarsal and metatarsal bones.   Features:• Color: gold (right) and pink (left)• Thickness: 1.4 mm• Plate size: S and M• Direction: right and left• Insertion in the metatarsals: 1st and 2nd – 2nd and 3rd• Geometry: curved and flat   Models:• Tarsometatarsal fusion 12 Curve 4 Holes Left 36 mm – TMT 05-E-12-C• Tarsometatarsal Fusion 12 Curve 4 Holes Right 36 mm – TMT 05-D-12-C• Tarsometatarsal Fusion 12 Curve 4 Holes Left 41 mm – TMT 50-E-12-C• Tarsometatarsal Fusion 12 Curve 4 Holes Right 41 mm – TMT 50-D-12-C• Tarsometatarsal Fusion 12 Flat 4 Holes Left 36 mm – TMT 05-E-12-P• Tarsometatarsal Fusion 12 Flat 4 Holes Right 36 mm – TMT 05-D-12-P• Tarsometatarsal Fusion 12 Flat 4 Holes Left 41 mm – TMT 50-E-12-P• Tarsometatarsal Fusion 12 Flat 4 Holes Right 41 mm – TMT 50-D-12-P Note: 1st and 2nd Tarsometatarsal Fusion Plates   Tarsometatarsal Fusion 23 Curve 4 HolesLeft 35 mm – TMT 05-E-23-C• Tarsometatarsal Fusion 23 Curve 4 HolesRight 35 mm – TMT 05-D-23-C• Tarsometatarsal Fusion 23 Curve 4 HolesLeft 38 mm – TMT 50-E-23-C• Tarsometatarsal Fusion 23 Curve 4 HolesRight 38 mm – TMT 50-D-23-C• Tarsometatarsal Fusion 23 Flat 4 HolesLeft 35 mm – TMT 05-E-23-P• Tarsometatarsal Fusion 23 Flat 4 HolesRight 35 mm – TMT 05-D-23-P• Tarsometatarsal Fusion 23 Flat 4 HolesLeft 38 mm – TMT 50-E-23-P• Tarsometatarsal Fusion 23 Flat 4 HolesRight 38 mm – TMT 50-D-23-PNote: 2nd and 3rd Tarsometatarsal Fusion Plates   Tarsometatarsal Fusion Plates – MTP• Used in procedures to treat Hallux Rigidus, by fusing the first metatarsophalangeal joint.   Features:• Color: gold (right) and pink (left)• Thickness: 1.4 mm• Plate size: S and M• Direction: right and left   Models:• Metatarsophalangeal Fusion 6 HolesRight 45 mm – MTP 05-D-00-U• Metatarsophalangeal Fusion 6 HolesLeft 45 mm – MTP 05-E-00-U• Metatarsophalangeal Fusion 6 HolesRight 50 mm – MTP 50-D-00-U• Metatarsophalangeal Fusion 6 HolesLeft 50 mm – MTP 50-E-00-U   Cuneiform Metatarsal Fusion Plate – MTC• Used in fusion procedures of the medial cuneiform and first metatarsal bones.   Features:• Color: gold (right) and pink (left)• Thickness: 1.4 mm• Plate size: S and M• Direction: right and left   Models:• Cuneiform Metatarsal Fusion 5 HolesRight 39

Razek Snap Off Screw

Products Home Products ANVISA No.: 80356130151Images for illustrative purposes only Parafuso Snap Off Razek The Razek Snap Off Screw family is composed of screws for bone synthesis that have non-absorbable rigid fixation characteristics. The screws have a system that breaks at the end of insertion. They are used for fractures with small fragments. ANVISA No.: 80356130151Images for illustrative purposes only Technical specifications • Non-resorbable• Non-sterile• Made of titanium alloy (ASTM F136)• Self-tapping thread• Self-tapping tip• Single-use implant Models • Razek Snap Off Screw D2.0 x 11.5 mm(Code 500080100) • Razek Snap Off Screw D2.0 x 12.5 mm(Code 500080200) • Razek Snap Off Screw D2.0 x 13.5 mm(Code 500080300) • Razek Snap Off Screw D2.7 x 13.5 mm(Code 500080400) • Razek Snap Off Screw D2.7 x 15.5 mm(Code 500080500) • Razek Snap Off Screw D2.7 x 17.5 mm(Code 500080600) MANUAL CATALOG VIDEO DOUBT Others Products edit post edit post edit post edit post


Ao aceitar abaixo, estará consentindo que o site possa armazenar Cookies além de concordar com nossa Política de Privacidade. Clique em “Saiba Mais” para se informar sobre o assunto.